Pollo 3MP Smart Wi-Fi Camera PLC-HS302
Original price was: ₨10,000.00.₨8,999.00Current price is: ₨8,999.00.
Product model | PLC-HS302 |
---|---|
Form Factor | Bullet Camera |
Product Colour | White |
Antenna | external antenna |
Materials | ABS + PC + Anti - UV |
Surface Finishing | matte face |
waterproof level | IP66 |
Dimension(L*W*H)(mm) | Ø67*110mm |
Flash | 8MB |
optics | 4.0mm,F2.6 aperture, waterproof |
Viewing angle | D:92°*H:78*V:42° |
Image circle | Ø6.9 |
Dimension | M12*22.9mm |
Sensor Type | GC2063 |
Resolution | 2304*1296 Pixel |
Night Vision | 8M distance (850nm) |
IR-LED | 2pcs 3030(IR+White)led |
WHITE-LED | 10m(850nm), White light colour temperature:4000K(pure white) |
IR-CUT | Pendulum IR-CUT |
photosensitive threshold | Colour cut black ≤0.9Lux; Cut the black colour≥ 8.5Lux |
Working Indicator | red green light*1 |
Standard | RTL8188FTV |
Mic | Full duplex, sensitivity: ≥-32±3dBm, IP66 waterproof |
Speaker | Built-in 8 ω /1W |
TF Card | Max support 128G |
Button Switch | Reset *1 |
Ethernet | Aside: JL1101 |
Antenna | 3DBi * 2 |
Wifi Maximum rate | 45Mbps |
Wifi distance | open≥150m |
Wifi standard | IEEE 802.11 b/g/n, single frequency 2.4G |
Power Supply | USB Port 5V |
Operational power consumption | Max 4.5W |
I/O Input port | TF Card*1, Mic*1 |
I/O Power port | USB2.0,2P/1.5mm, 3M long |
I/O Output port | Speaker*1; |
I/O key type | Reset*1; |
I/O Indicator light | Red and green two-colour indicator light*1; |
Echo cancellation | Support |
Two-Way Talk | Support |
Start-up the bell | Support |
Rest the bell | Support |
Compression method | G.711A |
Video Format | H.264 |
Video frame rate | Day:20fps; Night:15fps |
Resolution & frame rate | 2304*1296 Pixel, Multi-bit stream, adaptive; |
IR turned ON | Enable night vision view, IR, ICR auto detection |
IR turned OFF | Disable night view, turn off infrared, ICR stays in day view mode; |
Andorid | Android 4.3+ |
IOS | IOS 9.X-10.X more |
Mobile APP | Cloud Edge |
Cloud platform | Amazon |
Language | Chinese, English, French, German, Italian, Spanish, Japanese |
Basic function | Support configuration/real-time preview/screenshot/playback/intercom/video adjustment/recording/ PTZ/cloud storage |
Cloud recording storage | Support |
Online visitor | Max 5 user |
Type of Alarm | Support push message, sound and light alarm |
Detection Sensitivity | low/medium/high, default medium |
Audible alarm | Sound and light alarm: default white light alarm; |
Remote control and monitoring | Support |
Power failure memory | Support |
Onvif | Optional |
Noise detection | Support |
Privacy protection | Lens On / Lens Off / Timing Management / Geofencing |
playback recording mode | All-day/event recording is optional, and event recording is enabled by default |
Recording Time | 1min/2min/3min/off optional, off in default |
Pairing | QR code add, AP hotspot |
OTA upgrade | Support |
Green Light slow flash | preview image |
Green Light Always bright | Unreviewed image |
Green Light Always bright | online |
Green Light slow flash | running normally |
Red Light slow flash | The device enters this state when it is powered on and no network is configured |
Red Light slow flash | Duration: Indicates the duration until the standby network exits |
Red Light Quick flash | Duration: Until the network is configured successfully |
Green Light Quick flash | Until the upgrade succeeds or fails - (the green light is always on when the upgrade is successful) |
Red Light Red light quick flash | The network status is the same as device |
Reset the device | Red light flashes slowly -> red light flashes quickly -> green light is always on; The red-light flashes slowly when the network is not configured. When the user connects to the 2.4G network and scans the code for the device, the red-light flashes quickly; The red-light flashes quickly to indicate that the server is being connected; the indicator is steady green, the network is online successfully; |
Restart the device | Red light flashes slowly > red light flashes quickly -> green light is always on |
Broken network | Red light flashes quickly |
Package | Pearl cotton, giftbox, 3m USB cable, positioning sticker |
Temperature setting | working: -20 ~ 60 ℃, Humidity <95% Storage:-25 ~ 65 ℃, Humidity <95% |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.